The 3-in. Aluminator Retrofit is an all-aluminum retrofit insert drain with aluminum body that prevents water back-up issues. It includes:
- Heavy duty spun aluminum.
- A heavy duty aluminum ring that is 1.25 in. tall with 12 scallops to maximize drainage, seep holes on the bottom of the ring and bolt in place, and a 3-bolt aluminum strainer that measures 10 in. in diameter and 6 in. tall.
- A ProSeal rubber seal.
- A strong mechanical seal that prevents water back-up.
- Larger stud diameter for increased strength of hardware.
Measurements:
- Flange diameter: 16 in.
- Drain Outlet Length: 12 in.
Options & Accessories:
- Overflow option
- 2-in. Low Profile Aluminum Strainer
- PVC / TPO Coatings
Aluminator / ProSeal & Flow Capacity:
|
Size (in.)
|
GPM
|
|
3
|
45
|
|
4
|
85
|
|
5
|
180
|
|
6
|
210
|
Note: Above drains were able to perform at the peak rates with a head of water of 3.25 in. or less.
Seal Expansion Capacities for Aluminator & ProSeal Drains:
|
Drain Size (in.)
|
OD of Pre-Expanded Seal (in.)
|
Fits into Pipe ID (in.)
|
Fully Expanded Seal (in.)
|
|
3
|
2.86
|
2 7/8 – 3 1/4
|
3.40
|
|
4
|
3.74
|
3 7/8 – 4 1/4
|
4.40
|
|
5
|
4.73
|
4 7/8 – 5 1/4
|
5.40
|
|
6
|
5.75
|
5 7/8 – 6 1/4
|
6.40
|
Note: Due to variations in manufacturing and jobsite inconsistencies, the above data are guidelines only and are not guaranteed for any specific situations.
