Smith 1010 15" Bowl

Smith 1010 Roof Drain 15-inch

From: $111.10

To: $1,070.52

Price as configured: $0.00

1 x 1010 15" Bowl   +$111.10

* Required Fields

Price as configured: $0.00

Details

The Smith 1010 roof drain is used in flat roof construction. Its large profile dome provides sufficient free area for quick rain water drainage while protecting the drain sump and connecting piping from debris. A wide clamping surface holds flashing and roofing materials without puncturing. This drain comes regularly furnished with a Duco cast iron body combined with a flashing clamp and gravel stop, and a polyethylene dome. 

Pipe Sizes and Weights: 

Pipe Size Free Area (sq. in.)
2 to 4 in. 102.5
5 and 6 in. 102.5
8 in.  102.5
10 in.  122.5

Smith 1010 Options and Engineering Specs

DOWNLOAD PRODUCT SPECIFICATION SHEET

Standard Smith 1010 Bottom Outlet Roof Drain

Smith 1010 Bottom Outlet

Outlet Size (A) B (Bottom Outlet) (in.)
Caulk, No-Hub & Speedi-Set Threaded

C

Dia

D

Dia

E

Dia

F

Dia

2 - 4 5 3 3/4 3 3/4* 15 1/4 11 1 1/8
5, 6 5 3 3/4 -- 15 1/4 11 1 1/8

8 (-16)**

10 (-16)**

6 5 -- 16 12 1/2 1 1/8
8, 10 7 3/4 7 3/4 -- 20 16 1 5/8

Recommended Deck Openings

Outlet Size (in.) With Sump Receiver (in.) Without Sump Receiver (in.)
2 - 6 17 dia. 14 dia.

8 (-16)**

10 (-16)**

17 dia. 14 3/4 dia.

8**

10**

21 dia. 18 3/4 dia.

* C dimension is to internal stop of Speedi-Set Gasket
** NOTE: 08 & 10 outlet sizes are regularly furnished with a 20 in. dia. flange. If 16 in. dia. flange is required, (-16) MUST be specified. E.g. 1010Y08-16 or 1010Y10-16.

Smith 1010 Spare Parts & Accessories

Purchase the Smith 1010 roof drain as a complete drain above, or buy only the parts you need. 

Domes

Smith 1010 XL Cast Iron Dome

  • Has three tabs
  • Outside Diameter: 16 in. (includes tabs)
  • Height: 5 1/4 in.

Rings

Smith 1010 Large Cast Iron Drain Ring

  • Bolt-to-Bolt: 10 1/2 in. at 180 degrees
  • Outside Diameter: 14 in. (This can vary with the age of the existing ring, O.D. of gravel stop is 12 3/4 in.)
  • Casting #: 3260

Smith 1010 XL Cast Iron Drain Ring

  • Bolt-to-Bolt: 8 1/2 in. at 180 degrees
  • Outside Diameter: 18 1/2 in. (O.D. of gravel stop is 16 5/8 in.)
  • Casting #: 3747

Underdeck Clamp

Smith 1010 Underdeck Clamp

An underdeck clamp for the Smith 1010 Roof Drain should be specified on all but pour-in-place roof drain installations. Fits 2 to 5-in Smith 1010 roof drains.

Roof drains must be firmly secured to the roof with an underdeck clamp. If not, snow and rain loads, and regular roof expansion and contraction will cause the roofing membranes to flex and fail. Brittle tar will crack and leaks may also occur.

Bolt Kits

Smith Bolt Kit for 1010

  • Fits Smith 1010, 1310 and 1330 standard roof drains
  • Four bolts per kit

Smith Stainless Steel Bolt Kit

  • Replacement stainless steel bolt kit for the Smith 1010 roof drain, Smith 1310 and Smith 1330
  • 5/16-18 in. x 1 in. hex bolt
  • 5/16-18 in. x 1 in. nom washer
  • Includes four bolts and washers per kit

Outlet Types

  • Caulk Outlet
  • L Speedi-Set Service Weight: 2-, 3- and 4-in. only
  • LXH Speedi-Set Extra Heavy: 2-, 3- and 4-in. only
  • No-Hub
  • Threaded Outlet

Variations

  • Expansion Joint (specify fig. 1710)
  • Extension (specify height) (-E)
  • "L" Shaped Underdeck Clamp (-CL)
  • Secondary Flashing Clamp (-C2)
  • Sump Receiver (-R)
  • Underdeck Clamp (-C)
  • Vandal Proof Dome (-U)

Optional Materials

  • All Aluminum (-AA)
  • Aluminum Dome (-AD)***
  • Cast Iron Dome (-CID)***
  • Galvanized Cast Iron Dome (-CIDG)***
  • Galvanized Cast Iron Body & Collar (-G)
  • Rough Bronze Dome (-RBD)***
  • Stainless Steel (specify fig. 9780)

***Optional Domes' Free Area

Dome Material 2 - 6 & 8 (-16) Outlets 8 & 10 Outlets w/ 20 in. Flange
Aluminum Dome 98 150
Cast Iron Dome 80 --
Bronze Dome 95 150